|
Post by cammoammo on Mar 23, 2009 15:40:40 GMT -5
I am curently deciding on what airsoft gun is going to be my next purchase. I have limited it down to: the KWA KG36C AEG Airsoft Rifle thre GSG-5 R.I.S. FS AEG Softair Gun Full Metal the ECHO 1 614 AEG Airsoft Rifle the ECHO 1 Barrett REC7 AEG Airsoft Rifle
if any body owns one of these rifles, has used/fired one of these rifles, or if you just want to add your two cence, I would very much apreciate it!!!
|
|
|
Post by WarChild on Mar 24, 2009 9:11:50 GMT -5
well, you've got one brand name gun and three chinese clones on your list. a brand name taiwanese made gun is always better than any chinese made gun. the KWA is without a doubt the best choice on your list.
|
|
|
Post by cammoammo on Mar 24, 2009 15:05:16 GMT -5
Thank you very much for the advice!!!
I was also just wondering about any usefull accessories you could suggest. And more importaintly what battery would you suggest I use. Just looking around on the internet I found a INTELLECT 10.8v 2000mah NiMH Custom Battery Pack, which sounded like a top quality battery pack, and it could fit in the fore grip of the KWA, if you could tell me what you think about it, that would be helpfull.
Thanks for the help!!!
|
|
|
Post by cammoammo on Mar 24, 2009 15:58:28 GMT -5
One more thing, I was thinking about getting a laser, but dont know what to get. I see some that are like millitary grade for $100+ and then others for $20 that sound like their comparible to pen laser pointers. If you could tell me what you think, or if you think its worth it at all that would be cool. If you think it is worth it i think im looking for one for, at the max $50, but totaly open to suggestions.
|
|
|
Post by WarChild on Mar 24, 2009 20:57:14 GMT -5
green lasers are really cool; red lasers suck. green's aren't cheap though and run $70-$100 usually.
|
|
|
Post by cammoammo on Mar 25, 2009 8:22:22 GMT -5
Well, thats a little to expensive for me. Might put of buying it for a while if i do decide to get it. What do you think about the INTELLECT 10.8v 2000mah NiMH Custom Battery Pack, or any other accessories you can think of.
|
|
|
Post by cammoammo on Mar 28, 2009 15:00:54 GMT -5
How would you compare the KWA g36c to the G&G UMG
Also if i were to buy a silenser does it need to be attatched(glued) right to the inner barel of the gun, or is there something you can use to thread it on the barel so you can just screw it on/off. And also how well does a silenser on an airsoft gun work, I know how an actual silencer works but how does that same principle work on an airsoft gun.
Also, still wondering about what you think of the 10.8v, 4000mah battery for the KWA g36c.
|
|
|
Post by WarChild on Mar 30, 2009 19:36:49 GMT -5
How would you compare the KWA g36c to the G&G UMG Also if i were to buy a silenser does it need to be attatched(glued) right to the inner barel of the gun, or is there something you can use to thread it on the barel so you can just screw it on/off. And also how well does a silenser on an airsoft gun work, I know how an actual silencer works but how does that same principle work on an airsoft gun. Also, still wondering about what you think of the 10.8v, 4000mah battery for the KWA g36c. silencers thread only the end of the barrel, and will muffle the gun a bit, in addition to just looking cool. the handguard on the KWA G36C is designed to hold an 8.4V large battery. UMG vs. G36C: too close to call really. they're very similar guns, it mostly boils down to which one you like better, or feels more comfortable to you. personally, i'd take the UMG but that's just me.
|
|
|
Post by cammoammo on Apr 3, 2009 14:43:30 GMT -5
what type of spring is in the g and g UMG and what type of battery does it take
|
|
|
Post by WarChild on Apr 3, 2009 18:03:04 GMT -5
G&G UMG's shoot about 350 FPS out of the box with their M100 spring and tightbore barrel.
they take either 8.4V stick or 9.6V slim double stick batteries.
|
|