|
Post by laughatthemall on Aug 16, 2008 0:10:36 GMT -5
I just today (Friday, August 16) bought an airsoft pistol from you. I bought it, and it fired fine the first few minutes, but then, I had issues with the mags' gas (using propane with the adaptor you sell, I lubed the tank and everything correctly), for one, that both clips' gas sometimes runs out before the clip is empty, and that, on anoher one, it is leaking from the valve that supplies the gun with the propane (Slowly, so it can still be used, but I'm worried about it being a hazard). The other one I bought seperately, when firing, sometimes sprays out its' entire contents out the barrel of the pistol (just the gas, not the BB's.) Is this a defect or anything? If so, can it be replaced/repaired? I love the gun, it is really great, well worth the money, but I would just like the clips to work better, if you could help me with that. Thank you for your help.
|
|
ruvon
New Member
Nothing Less Than Legendary
Posts: 31
|
Post by ruvon on Oct 28, 2008 21:37:08 GMT -5
Well, I don't know if you've looked at this in a while or not laugh. But lets take this one step by step.
If the clip is emptying out of gas before the bb's are cleared, it maybe your not filling it enough. The fill valve on the other mag may just need more time to get lubed up. Sometimes if the mags haven't been filled with gas, the valve seals will leak. Just run some gas with silicone through it and it should change soon enough (within 5 to 10) Sometimes GBB's also are victims to something called the cool down effect. What happens is that the gas is too cold to actually turn to gas (propane becomes liquid in the mag, then once into the chamber will turn to gas) causing all the gas to vent.
I know this is necro posting.....I do hope you get to see this....
|
|