|
Post by elykatupac on Jul 8, 2008 12:49:00 GMT -5
When i purchased this gun i realized the iron sights were not straight. I noticed to adjust the sights an allen wrench was required. Surprisingly none of my allen's fit so i had to use special one's my friend had for his saxophone . Also the ROF adjuster fell off on the right side of the gun and requires an extremely tiny allen to tighten it back on. So i am asking what kind of allen's are needed for my gun?
|
|
tds
New Member
Posts: 48
|
Post by tds on Jul 8, 2008 14:45:05 GMT -5
Most airsoft guns use metric (like the real ones), where in the US standard allen wrenches are in imperial.
If you are rough with the gun you probably want to get a little tube of blue locktite and use that on the smaller screws that you normally dont remove like the selector and such so you do not lose them. Don't overtighten anything, composites and aluminum are strong but you can strip them out if you put some muscle behind it.
|
|
|
Post by elykatupac on Jul 8, 2008 22:07:45 GMT -5
Thanks a ton tds!
|
|
|
Post by elykatupac on Jul 10, 2008 12:22:11 GMT -5
any ideas as to where metric allen's are sold?
|
|
|
Post by WarChild on Jul 10, 2008 21:29:51 GMT -5
any ideas as to where metric allen's are sold? any place that sells tools. i.e. lowes, home depot, sears, harbor freight, etc.
|
|
|
Post by elykatupac on Jul 11, 2008 0:06:16 GMT -5
thanks warchild
|
|